Action Clutch Stage 2 Clutch Kit (90-93 Integra / DA)
- 110% Increase in Holding Capacity
- Fitments for 90-91 and 92-93 Integra Chassis
- Perfect for Occasional Track Use
- Sprung, Full Face Organic Clutch
- Description
- Vehicle Fitment
- Technical Data
- Included
- Warranty
-
Action Clutch Stage 2 is the sweet spot for an Action Clutch Integra 90-93 that actually gets driven hard.
If your DA is still cable trans and your B18A1 or B17A1 has bolt ons, cams, or it sees the occasional track day, this is the Integra 90-93 clutch kit that makes sense. The Action Clutch Stage 2 1KS kit runs a sprung Kevlar disc with a steel backed segmented friction face, so you get a real bump in clamp and bite without the on off jerk you get from a ceramic puck. We run these exact kits on our own cars when we want a high performance Integra clutch that still behaves in traffic.
The single diaphragm pressure plate keeps the pedal close to OEM. After break in, your left leg will barely notice. Your gearbox will notice, though, because it stops slipping when you lean on it. That is the whole point of a Stage 2 clutch kit Integra owners can daily.
110% increased holding capacity over the factory clutch. Action Clutch rates that at the crank, not the wheel. For a mostly N A B series with supporting mods, this gives you room to grow without going straight to an on purpose annoying clutch.
Kevlar also takes heat and mileage well. It is not nearly as abrasive to the flywheel as many ceramic setups, which matters if you do your Acura Integra clutch replacement once and do not want to buy a flywheel every time you swap discs. Think of it as a reinforced clutch Acura Integra drivers can beat on and still live with.
Who this is for: Street driven DA builds, autocross, occasional circuit or time attack. Anyone shopping a heavy duty clutch Integra setup that holds power without turning your commute into calf day.
Who this is NOT for: Drag racing or drifting. Action Clutch calls this out and we agree. If you plan to clutch dump repeatedly or do long high RPM slip, do not buy Stage 2 clutch kit, step up to Stage 4 or higher.
Break in matters. Give it 1,000 street miles, stay under 4,500 RPM, and keep it to half throttle max. Skip this and you can glaze the disc, lose Integra clutch kit performance, and you will void the warranty.
Kit includes: performance pressure plate, Kevlar sprung disc, throwout bearing, pilot bearing, and alignment tool. If you are looking to Integra clutch kit buy online during an Acura Integra clutch sale, this is the Kevlar clutch kit Integra owners usually end up happiest with as an Integra clutch kit upgrade.
Fitment 1990-1993 Acura Integra (DA chassis) Engines B18A1 (90-91 LS), B17A1 / B18A1 (92-93) Transmission Cable only Holding capacity 110% over stock (crank torque) Disc material Steel backed segmented Kevlar Engagement OEM like feel, sprung hub Recommended use Street, autocross, occasional circuit / time attack Not recommended Drag racing, drifting Break in 1,000 miles, under 4,500 RPM, half throttle max Part numbers ACR-0460 (90-91 Integra), ACR-0468 (92-93 Integra) SKUs and chassis options SKU: ACC-CLK-01-02 | Chassis: 90-91 Integra. SKU: ACC-CLK-01-08 | Chassis: 92-93 Integra. - 1990-1993 Acura Integra
-
1,000 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
-
(1) Pilot Bearing / Bushing (when applicable)(1) Conventional Release Bearing
-
ACTION CLUTCH products are manufactured and tested to the highest quality standards. This limited one (1) year warranty offered by ACTION CLUTCH covers defects in material or workmanship in new ACTION CLUTCH products. This warranty extends to the original purchaser only and is nontransferable. Only consumers purchasing ACTION CLUTCH products from authorized ACTION CLUTCH retailers or resellers or through the ACTION CLUTCH website may obtain coverage under our limited warranties.ACTION CLUTCH warrants this product against defects in material or workmanship as follows:ACTION CLUTCH will replace at no charge for parts only that proves defective because of improper workmanship. If ACTION CLUTCH is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, ACTION CLUTCH may elect to refund the purchase price in exchange for the return of the product.
Action Clutch offers a 1 (one) year warranty from the original date of purchase. We also offer a 30-day return policy with a 20% restocking fee.Our warranty does not cover any problem that is caused by:
(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by ACTION CLUTCH. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.Please Note: ACTION CLUTCH will not be liable for labor charges and other intangible or consequent losses that might be claimed as a result of the failure of any part, nor shall they be liable for damages or injury to any persons or property resulting from the misuses or improper installation of any part subject to this warranty.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).ACTION CLUTCH will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide:- The sales receipt or other evidence of the date and place of purchase.
- A description of the problem.
- Delivery of the product or the defective part, postage prepaid by buyer and carefully packed and insured, to: ACTION CLUTCH, 3912 WHITTIER BLVD, LOS ANGELES, CA 90023
When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid.
ACTION CLUTCH SHALL NOT BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY)How Does State Law Apply? The laws of the State of CALIFORNIA, USA, govern our warranties. It gives you specific legal rights, and you may also have other rights that vary from state to state. Our warranties do not affect any additional rights consumers have under laws in their jurisdictions governing the sale of consumer goods. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in our warranty statements may not apply. You may be required by law to give us a reasonable opportunity to correct or cure any failure to comply before you can bring any action in court against us under the Magnuson-Moss Warranty Act.
Description
- 110% Increase in Holding Capacity
- Fitments for 90-91 and 92-93 Integra Chassis
- Perfect for Occasional Track Use
- Sprung, Full Face Organic Clutch
- Description
- Vehicle Fitment
- Technical Data
- Included
- Warranty
-
Action Clutch Stage 2 is the sweet spot for an Action Clutch Integra 90-93 that actually gets driven hard.
If your DA is still cable trans and your B18A1 or B17A1 has bolt ons, cams, or it sees the occasional track day, this is the Integra 90-93 clutch kit that makes sense. The Action Clutch Stage 2 1KS kit runs a sprung Kevlar disc with a steel backed segmented friction face, so you get a real bump in clamp and bite without the on off jerk you get from a ceramic puck. We run these exact kits on our own cars when we want a high performance Integra clutch that still behaves in traffic.
The single diaphragm pressure plate keeps the pedal close to OEM. After break in, your left leg will barely notice. Your gearbox will notice, though, because it stops slipping when you lean on it. That is the whole point of a Stage 2 clutch kit Integra owners can daily.
110% increased holding capacity over the factory clutch. Action Clutch rates that at the crank, not the wheel. For a mostly N A B series with supporting mods, this gives you room to grow without going straight to an on purpose annoying clutch.
Kevlar also takes heat and mileage well. It is not nearly as abrasive to the flywheel as many ceramic setups, which matters if you do your Acura Integra clutch replacement once and do not want to buy a flywheel every time you swap discs. Think of it as a reinforced clutch Acura Integra drivers can beat on and still live with.
Who this is for: Street driven DA builds, autocross, occasional circuit or time attack. Anyone shopping a heavy duty clutch Integra setup that holds power without turning your commute into calf day.
Who this is NOT for: Drag racing or drifting. Action Clutch calls this out and we agree. If you plan to clutch dump repeatedly or do long high RPM slip, do not buy Stage 2 clutch kit, step up to Stage 4 or higher.
Break in matters. Give it 1,000 street miles, stay under 4,500 RPM, and keep it to half throttle max. Skip this and you can glaze the disc, lose Integra clutch kit performance, and you will void the warranty.
Kit includes: performance pressure plate, Kevlar sprung disc, throwout bearing, pilot bearing, and alignment tool. If you are looking to Integra clutch kit buy online during an Acura Integra clutch sale, this is the Kevlar clutch kit Integra owners usually end up happiest with as an Integra clutch kit upgrade.
Fitment 1990-1993 Acura Integra (DA chassis) Engines B18A1 (90-91 LS), B17A1 / B18A1 (92-93) Transmission Cable only Holding capacity 110% over stock (crank torque) Disc material Steel backed segmented Kevlar Engagement OEM like feel, sprung hub Recommended use Street, autocross, occasional circuit / time attack Not recommended Drag racing, drifting Break in 1,000 miles, under 4,500 RPM, half throttle max Part numbers ACR-0460 (90-91 Integra), ACR-0468 (92-93 Integra) SKUs and chassis options SKU: ACC-CLK-01-02 | Chassis: 90-91 Integra. SKU: ACC-CLK-01-08 | Chassis: 92-93 Integra. - 1990-1993 Acura Integra
-
1,000 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
-
(1) Pilot Bearing / Bushing (when applicable)(1) Conventional Release Bearing
-
ACTION CLUTCH products are manufactured and tested to the highest quality standards. This limited one (1) year warranty offered by ACTION CLUTCH covers defects in material or workmanship in new ACTION CLUTCH products. This warranty extends to the original purchaser only and is nontransferable. Only consumers purchasing ACTION CLUTCH products from authorized ACTION CLUTCH retailers or resellers or through the ACTION CLUTCH website may obtain coverage under our limited warranties.ACTION CLUTCH warrants this product against defects in material or workmanship as follows:ACTION CLUTCH will replace at no charge for parts only that proves defective because of improper workmanship. If ACTION CLUTCH is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, ACTION CLUTCH may elect to refund the purchase price in exchange for the return of the product.
Action Clutch offers a 1 (one) year warranty from the original date of purchase. We also offer a 30-day return policy with a 20% restocking fee.Our warranty does not cover any problem that is caused by:
(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by ACTION CLUTCH. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.Please Note: ACTION CLUTCH will not be liable for labor charges and other intangible or consequent losses that might be claimed as a result of the failure of any part, nor shall they be liable for damages or injury to any persons or property resulting from the misuses or improper installation of any part subject to this warranty.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).ACTION CLUTCH will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide:- The sales receipt or other evidence of the date and place of purchase.
- A description of the problem.
- Delivery of the product or the defective part, postage prepaid by buyer and carefully packed and insured, to: ACTION CLUTCH, 3912 WHITTIER BLVD, LOS ANGELES, CA 90023
When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid.
ACTION CLUTCH SHALL NOT BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY)How Does State Law Apply? The laws of the State of CALIFORNIA, USA, govern our warranties. It gives you specific legal rights, and you may also have other rights that vary from state to state. Our warranties do not affect any additional rights consumers have under laws in their jurisdictions governing the sale of consumer goods. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in our warranty statements may not apply. You may be required by law to give us a reasonable opportunity to correct or cure any failure to comply before you can bring any action in court against us under the Magnuson-Moss Warranty Act.
