CBC Haltech IC7 Dash Display Mount for Civic/Integra

CBC Haltech IC7 Dash Display Mount

Running a Haltech IC7 in your EF/EG/EK Civic, DC Integra, CRX, or Del Sol and you want it to look clean? This is the CBC 3D-printed dash mount that lets you flush-mount your IC7 where your factory gauge cluster goes. No janky suction cup mounts on your windshield or zip-tied dashboards. The IC7 sits flush in your dash like it came from the factory. You're getting a race-ready digital display without your interior looking hacked together. The mount's designed specifically for your chassis so it fits right and looks clean.

Here's What Makes These Mounts Different

Most people running aftermarket digital displays just stick them on the dash with double-sided tape or suction cups. It works but it looks terrible. CBC designed these mounts to bolt into your factory gauge cluster location using your stock mounting points. The IC7 sits exactly where your factory cluster was. The mount's 3D-printed from ABS plastic with a textured finish that matches Honda's factory dash texture. It doesn't look like an add-on. It looks like Honda made a digital dash option for your car. Most applications are direct bolt-in. The EF sedan needs some trimming to fit but it's minor. Everything else bolts straight in.

Pre-Assembled and Ready to Install

The mount comes pre-assembled. You're not piecing together multiple parts or figuring out how things go together. Pull your factory gauge cluster out, unbolt it from the dash, bolt the CBC mount in using your factory bolts, drop your IC7 into the mount, and you're done. If you've ever pulled a Honda gauge cluster, you can install this. Takes maybe an hour if you're being slow about it.

3D-Printed ABS with Factory Texture

The mount's 3D-printed from ABS plastic. It's strong and it's not going to crack or warp from heat in your dash. The surface has a textured finish that matches Honda's factory dash texture. It doesn't look like a 3D-printed part. It looks like an OEM piece. CBC's dialed in their finish process so the mount blends with your factory dash instead of sticking out like some cheap bracket.

What You Get

• CBC Haltech IC7 dash display mount
• 3D-printed ABS plastic construction
• Factory-style textured finish
• Pre-assembled (ready to install)
• Designed for flush-mount IC7 installation
• Uses factory mounting points (direct bolt-in for most applications)

Fits Your Car

• 1988-1991 Honda Civic (EF, requires trimming for sedan)
• 1992-1995 Honda Civic (EG)
• 1996-2000 Honda Civic (EK)
• 1994-2001 Acura Integra (DC)
• 1988-1991 Honda CRX (EF)
• 1993-1997 Honda Del Sol

Note: The mount's designed for the Haltech IC7 digital display. It won't fit other displays. Most applications bolt straight in using your factory gauge cluster mounting points. The EF Civic sedan needs minor trimming for proper fitment - you're trimming a bit of the mount to clear the dash structure. EF coupes, EG, EK, DC Integra, CRX, and Del Sol are direct bolt-in. When you're installing it, make sure your IC7's wiring is routed cleanly before you button everything up. You don't want wires pinched or rubbing on sharp edges. Photos show DC2 Integra, EF, and EK mounts. Del Sol and EG Civic mounts aren't pictured but they're the same quality and fitment. If you're running a Haltech setup and you want your dash to look clean, this mount's the way to do it.