CBC Haltech UC10 Dash Display Mount for EG/EK Civic

CBC Haltech UC10 Digital Dash Mount - EG/EK Civic

Running a Haltech UC10 digital dash in your Civic, CRX, or Integra and you don't want it looking like a universal bracket bolted to your dash? Custom Built Cars (CBC) makes a 3D-printed dash mount that replaces your factory gauge cluster and holds the UC10 flush in the stock cluster opening. The mount's made from ABS plastic with a textured finish that matches your factory dash texture. It looks way cleaner than universal brackets or custom metal mounts. The mount comes pre-assembled and it bolts into your factory cluster location with minimal trimming. If you're running a Haltech setup and you want your digital dash to look like it belongs there, this is the cleanest option.

Here's What You're Getting

The CBC mount replaces your entire factory gauge cluster. You're pulling your stock cluster out and installing this mount in the same location. The Haltech UC10 sits flush in the mount and the whole assembly sits in your factory cluster opening. The mount's designed to use your factory cluster mounting points, so you're not drilling new holes or fabricating custom brackets. Some minor trimming is usually required to get everything to fit, but it's way easier than building a custom mount from scratch.

ABS Plastic with Textured Finish

The mount's 3D-printed from ABS plastic. ABS is strong enough to hold the UC10 securely and it doesn't crack or warp from heat like cheaper plastics do. CBC finishes the mount with a textured surface that's close to your factory dash grain. It's not a perfect match to OEM texture, but it's way better than smooth plastic or a metal bracket. From a few feet away, it looks like it could've come from the factory.

Four Chassis Variants Available

CBC makes this mount for four different Honda/Acura chassis. Make sure you order the correct variant for your car:

• EG Civic (1992-1995)
• EK Civic (1996-2000)

The mounts are different for each chassis because the factory cluster openings are different sizes and shapes. If you order the wrong variant, it won't fit your car.

What You Get

• CBC Haltech UC10 digital dash mount
• 3D-printed ABS plastic construction
• Textured finish to match factory dash grain
• Pre-assembled and ready to install
• Mounts in factory cluster location
• Haltech UC10 digital dash NOT included
• Available for: EG Civic, EK Civic

Fits Your Car

• 1992-1995 Honda Civic (EG chassis - order EG variant)
• 1996-2000 Honda Civic (EK chassis - order EK variant)

Note: This mount does NOT include the Haltech UC10 digital dash. You need to buy the UC10 separately. Make sure you order the correct chassis variant. The EG and EK mounts are all different and they're not interchangeable. Some trimming of the factory dash or the mount is usually required to get everything to fit properly. Test-fit the mount before you start cutting anything. The Haltech UC10 needs to be wired into your ECU and sensors. This mount just holds the display - it doesn't include any wiring or electronics. If you're not running a Haltech ECU, you'll need to wire the UC10 to your existing ECU or use it as a standalone display with external sensors.