đźšš Free Worldwide Shipping on All Orders!Shop Now
HomeStore

DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si

DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si

  • 50 State C.A.R.B. Compliant (EO# D-370-14)
  • Larger Than Stock Diameter Tubing Allows for Increased Exhaust Flow
  • Equal Length Runner Design Improves Midrange Performance
  • Bolts Directly to All OEM Equipment
  • Description
  • Vehicle Fitment
  • Technical Data
  • Included
  • Install Guide
  • DC Sports Header for 92-00 Civic / 93-97 Del Sol Si - Stainless & Ceramic

    If you're still running the stock cast manifold on your D-series, you're leaving real power on the table. This DC Sports header is a 4-1 long-tube design that swaps out that heavy, restrictive lump for equal-length, mandrel-bent runners that actually let your motor breathe. The result is sharper throttle response and noticeable gains across the whole powerband - not just a top-end blip that disappears below 5,000 rpm.

    Two finishes: Stainless or Ceramic Coated

    Pick what fits your build and budget. The HHS5613 is the stainless version - bare 304 stainless that looks clean and holds up well to daily use. The HHC5613 adds a high-temp ceramic coating rated to 1,200°F. That coating keeps heat locked in the tubes so exhaust gas moves faster, which sharpens scavenging and keeps power consistent on back-to-back pulls. It also drops under-hood temps noticeably, so your intake air and wiring stay cooler during summer traffic or a long track session.

    Why it beats the stock manifold

    • 4-1 merge collector - pulls strong from low rpm all the way to redline, no lazy midrange dip
    • 304 stainless mandrel-bent tubing - smooth radius bends give exhaust a clean, unobstructed path out of the head
    • CNC-machined 3/8" flanges - stay flat and seal tight after dozens of heat cycles, no warping, no leaks
    • Satin ceramic coating (HHC5613) - cuts engine bay temps, fights corrosion, and handles sustained heat at the track
    • Quality welds inside and out - these hold up to hard use, not just show use
    • 50-state legal - CARB EO D-370-18 covers listed 1.5L and 1.6L D-series trims, so you're not rolling the dice at smog

    What to expect on the car

    On a healthy stock D-series, expect 8-12 whp and a noticeably fatter midrange. The exhaust note gets deeper and crisper without turning into a droning mess on the freeway. If you're already running an intake and a tune, you'll get more out of it. Want to keep building? Pair this with a Civic 1992-1995 Engine bolt-on or check the full DC Sports Engine lineup for intake and exhaust combos that work well together.

    Direct-fit applications

    • 1992-2000 Honda Civic EX / LX / DX / Si (D15 / D16)
    • 1993-1997 Honda Del Sol S / Si (D15 / D16)

    Fits with the factory cat or most aftermarket test pipes. A/C and power steering stay intact, so you're not turning your daily into a track-only car just to pick up some power. If your Civic is running a D-series and it's on the fitment list, this is a direct bolt-on.

    Also running a B-series or VTEC D? Check out the DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si or the DC Sports Header for 99-00 Civic Si/94-97 Del Sol VTEC if you're on the B16 / ZC side of things.

    • 1992-2000 Honda Civic - EX, LX, DX, Si (D15 / D16 engines)
    • 1993-1997 Honda Civic Del Sol - S, Si (D15 / D16 engines)

    Compatible with the factory catalytic converter and most aftermarket test pipes. Retains A/C and power steering brackets. Not compatible with B-series or K-series swaps - see DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si for current fitment or contact us if you're on a swapped motor.

    • Design: 4-1 long-tube header
    • Primary runner I.D.: 1.7"
    • Collector I.D.: 1.8"
    • Tubing material: 304 stainless steel, mandrel-bent
    • Flange: CNC-machined 3/8" thick
    • Coating (HHC5613): Satin ceramic, rated to 1,200°F
    • Emissions: CARB EO D-370-18 (50-state legal for listed 1.5L / 1.6L D-series trims)
    • Fitment: D15 / D16 engines, 1992-2000 Civic, 1993-1997 Del Sol S/Si
    • 1x DC Sports header assembly (stainless or ceramic per SKU)
    • Hardware kit (bolts and nuts for header-to-head flange)

    Header gasket not included - we recommend replacing the factory gasket on install. Oxygen sensor bung is pre-tapped on the collector.

  • Install Guide
Select Finish
From $161.00

Original: $459.99

-65%
DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si—

$459.99

$161.00
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7

Description

  • 50 State C.A.R.B. Compliant (EO# D-370-14)
  • Larger Than Stock Diameter Tubing Allows for Increased Exhaust Flow
  • Equal Length Runner Design Improves Midrange Performance
  • Bolts Directly to All OEM Equipment
  • Description
  • Vehicle Fitment
  • Technical Data
  • Included
  • Install Guide
  • DC Sports Header for 92-00 Civic / 93-97 Del Sol Si - Stainless & Ceramic

    If you're still running the stock cast manifold on your D-series, you're leaving real power on the table. This DC Sports header is a 4-1 long-tube design that swaps out that heavy, restrictive lump for equal-length, mandrel-bent runners that actually let your motor breathe. The result is sharper throttle response and noticeable gains across the whole powerband - not just a top-end blip that disappears below 5,000 rpm.

    Two finishes: Stainless or Ceramic Coated

    Pick what fits your build and budget. The HHS5613 is the stainless version - bare 304 stainless that looks clean and holds up well to daily use. The HHC5613 adds a high-temp ceramic coating rated to 1,200°F. That coating keeps heat locked in the tubes so exhaust gas moves faster, which sharpens scavenging and keeps power consistent on back-to-back pulls. It also drops under-hood temps noticeably, so your intake air and wiring stay cooler during summer traffic or a long track session.

    Why it beats the stock manifold

    • 4-1 merge collector - pulls strong from low rpm all the way to redline, no lazy midrange dip
    • 304 stainless mandrel-bent tubing - smooth radius bends give exhaust a clean, unobstructed path out of the head
    • CNC-machined 3/8" flanges - stay flat and seal tight after dozens of heat cycles, no warping, no leaks
    • Satin ceramic coating (HHC5613) - cuts engine bay temps, fights corrosion, and handles sustained heat at the track
    • Quality welds inside and out - these hold up to hard use, not just show use
    • 50-state legal - CARB EO D-370-18 covers listed 1.5L and 1.6L D-series trims, so you're not rolling the dice at smog

    What to expect on the car

    On a healthy stock D-series, expect 8-12 whp and a noticeably fatter midrange. The exhaust note gets deeper and crisper without turning into a droning mess on the freeway. If you're already running an intake and a tune, you'll get more out of it. Want to keep building? Pair this with a Civic 1992-1995 Engine bolt-on or check the full DC Sports Engine lineup for intake and exhaust combos that work well together.

    Direct-fit applications

    • 1992-2000 Honda Civic EX / LX / DX / Si (D15 / D16)
    • 1993-1997 Honda Del Sol S / Si (D15 / D16)

    Fits with the factory cat or most aftermarket test pipes. A/C and power steering stay intact, so you're not turning your daily into a track-only car just to pick up some power. If your Civic is running a D-series and it's on the fitment list, this is a direct bolt-on.

    Also running a B-series or VTEC D? Check out the DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si or the DC Sports Header for 99-00 Civic Si/94-97 Del Sol VTEC if you're on the B16 / ZC side of things.

    • 1992-2000 Honda Civic - EX, LX, DX, Si (D15 / D16 engines)
    • 1993-1997 Honda Civic Del Sol - S, Si (D15 / D16 engines)

    Compatible with the factory catalytic converter and most aftermarket test pipes. Retains A/C and power steering brackets. Not compatible with B-series or K-series swaps - see DC Sports Stainless Header for 92-00 Civic/93-97 Del Sol Si for current fitment or contact us if you're on a swapped motor.

    • Design: 4-1 long-tube header
    • Primary runner I.D.: 1.7"
    • Collector I.D.: 1.8"
    • Tubing material: 304 stainless steel, mandrel-bent
    • Flange: CNC-machined 3/8" thick
    • Coating (HHC5613): Satin ceramic, rated to 1,200°F
    • Emissions: CARB EO D-370-18 (50-state legal for listed 1.5L / 1.6L D-series trims)
    • Fitment: D15 / D16 engines, 1992-2000 Civic, 1993-1997 Del Sol S/Si
    • 1x DC Sports header assembly (stainless or ceramic per SKU)
    • Hardware kit (bolts and nuts for header-to-head flange)

    Header gasket not included - we recommend replacing the factory gasket on install. Oxygen sensor bung is pre-tapped on the collector.

  • Install Guide