Honda CR-Z/Fit L Series Intake Manifold Gasket 17105-RB0-004

Honda OEM Intake Manifold Gasket - 2011-2016 CR-Z / 2009-2013 Fit (L Series)

Pulling your intake manifold on your CR-Z or Fit? You'll need a new gasket. This is the genuine Honda intake manifold gasket for the L series engine in your 2011-2016 CR-Z or 2009-2013 Fit. It seals the mating surface between your cylinder head and intake manifold so you don't get vacuum leaks that cause rough idle, poor fuel economy, or check engine lights. Part number 17105-RB0-004.

Why You Can't Reuse the Old Gasket

Intake manifold gaskets compress when they're torqued down, which is how they seal. Once you unbolt the manifold, the gasket won't seal properly if you try to reuse it. You'll end up with vacuum leaks that make your engine idle rough, run lean, or throw codes. A vacuum leak also messes with your air fuel ratio, which hurts performance and fuel economy. Just replace the gasket and save yourself the headache of chasing vacuum leaks later.

OEM Quality Matters

Cheap aftermarket intake gaskets often don't fit the port openings correctly or they're made from materials that don't seal as well as the Honda OEM gasket. This genuine Honda gasket is made to the same specs as the one that came on your car from the factory, so it fits right and seals properly every time.

Fits Your Car

• 2011-2016 Honda CR-Z (LEA1 engine)
• 2009-2013 Honda Fit (L15A engine)

Specifications

• Honda part number: 17105-RB0-004
• Genuine Honda OEM replacement
• Direct fit for L series engines

Note: Always replace your intake manifold gasket when you remove the manifold. Reusing old gaskets causes vacuum leaks. This gasket is specific to the L15A engine in the 2011-2016 CR-Z and 2009-2013 Fit.