Honda Power Steering Fluid 08206-9002
- Genuine Honda Product
- 12 Fluid Ounce Bottle
- Compatible with Most Golden Era Honda/Acura Chassis
- Helps Maintain Smooth Steering Response
- Description
- Vehicle Fitment
- Technical Data
- Included
-
Honda Power Steering Fluid (12 oz) - OEM 08206-9002
Your Honda or Acura's hydraulic power steering system is picky about what goes in it - and for good reason. The seals, hoses, and pump internals are sized and calibrated for Honda's own fluid spec. Pour in generic ATF or the wrong hydraulic fluid and you're looking at swollen seals, pump whine, and eventually a rack that fights back. This is the stuff Honda engineers actually spec: genuine OEM Power Steering Fluid 08206-9002, 12 fl oz per bottle.
It's not just marketing. Honda's hydraulic power steering fluid has a different viscosity and additive package than generic ATF - that's why Honda explicitly calls it out in the service manual. Use it when you're topping off a slow leak, doing a full system flush, or wrapping up a steering rack replacement. If your service manual says "Honda Genuine Power Steering Fluid," this is exactly what it's asking for.
Most cars take around 1 quart (32 oz) total capacity, so you'll want to grab two bottles for a complete flush. One bottle is usually enough for a top-off if you're just correcting a low reservoir.
Key Features:
- Part Number: 08206-9002
- Volume: 12 fluid ounces per bottle
- Application: Honda and Acura models with hydraulic (not electric) power steering
- OEM spec fluid - matches what Honda used at the factory
- Protects pump internals, seals, and hoses from premature wear
- Reduces pump noise caused by fluid breakdown or contamination
- Safe for topping off or complete system flush
- Sold individually
Most vehicles require (2) bottles for a complete flush. One bottle is typically sufficient for topping off.
-
- 2006-2011 Acura CSX
- 1997-2005 Acura EL
- 1986-2001 Acura Integra
- 1986-1995 Acura Legend
- 2001-2013 Acura MDX
- 1991-2005 Acura NSX
- 2007-2012 Acura RDX
- 1996-2012 Acura RL
- 2002-2006 Acura RSX
- 1996-2014 Acura TL
- 2004-2014 Acura TSX
- 1992-1994 Acura Vigor
- 1990-2012 Honda Accord
- 1988-2011 Honda Civic
- 1997-2011 Honda CR-V
- 1988-1991 Honda CRX
- 1993-1997 Honda Del Sol
- 2003-2011 Honda Element
- 1995-2010 Honda Odyssey
- 2003-2015 Honda Pilot
- 1983-2001 Honda Prelude
- 2006-2014 Honda Ridgeline
- 2000-2009 Honda S2000
Applies to hydraulic power steering systems only. Does not apply to electric power steering (EPS) models. Check your reservoir cap or owner's manual if unsure which system your vehicle has.
-
Part Number 08206-9002 Fluid Type Hydraulic Power Steering Fluid Volume 12 fl oz (355 mL) OEM Spec Honda Genuine - meets factory requirements Compatible Systems Hydraulic power steering only (not for electric/EPS systems) ATF Compatible No - do not substitute with ATF or generic hydraulic fluid Typical System Capacity ~32 fl oz (1 quart) - most vehicles need 2 bottles for a full flush -
- (1) 12 fl oz bottle of Honda Genuine Power Steering Fluid (08206-9002)
Description
- Genuine Honda Product
- 12 Fluid Ounce Bottle
- Compatible with Most Golden Era Honda/Acura Chassis
- Helps Maintain Smooth Steering Response
- Description
- Vehicle Fitment
- Technical Data
- Included
-
Honda Power Steering Fluid (12 oz) - OEM 08206-9002
Your Honda or Acura's hydraulic power steering system is picky about what goes in it - and for good reason. The seals, hoses, and pump internals are sized and calibrated for Honda's own fluid spec. Pour in generic ATF or the wrong hydraulic fluid and you're looking at swollen seals, pump whine, and eventually a rack that fights back. This is the stuff Honda engineers actually spec: genuine OEM Power Steering Fluid 08206-9002, 12 fl oz per bottle.
It's not just marketing. Honda's hydraulic power steering fluid has a different viscosity and additive package than generic ATF - that's why Honda explicitly calls it out in the service manual. Use it when you're topping off a slow leak, doing a full system flush, or wrapping up a steering rack replacement. If your service manual says "Honda Genuine Power Steering Fluid," this is exactly what it's asking for.
Most cars take around 1 quart (32 oz) total capacity, so you'll want to grab two bottles for a complete flush. One bottle is usually enough for a top-off if you're just correcting a low reservoir.
Key Features:
- Part Number: 08206-9002
- Volume: 12 fluid ounces per bottle
- Application: Honda and Acura models with hydraulic (not electric) power steering
- OEM spec fluid - matches what Honda used at the factory
- Protects pump internals, seals, and hoses from premature wear
- Reduces pump noise caused by fluid breakdown or contamination
- Safe for topping off or complete system flush
- Sold individually
Most vehicles require (2) bottles for a complete flush. One bottle is typically sufficient for topping off.
-
- 2006-2011 Acura CSX
- 1997-2005 Acura EL
- 1986-2001 Acura Integra
- 1986-1995 Acura Legend
- 2001-2013 Acura MDX
- 1991-2005 Acura NSX
- 2007-2012 Acura RDX
- 1996-2012 Acura RL
- 2002-2006 Acura RSX
- 1996-2014 Acura TL
- 2004-2014 Acura TSX
- 1992-1994 Acura Vigor
- 1990-2012 Honda Accord
- 1988-2011 Honda Civic
- 1997-2011 Honda CR-V
- 1988-1991 Honda CRX
- 1993-1997 Honda Del Sol
- 2003-2011 Honda Element
- 1995-2010 Honda Odyssey
- 2003-2015 Honda Pilot
- 1983-2001 Honda Prelude
- 2006-2014 Honda Ridgeline
- 2000-2009 Honda S2000
Applies to hydraulic power steering systems only. Does not apply to electric power steering (EPS) models. Check your reservoir cap or owner's manual if unsure which system your vehicle has.
-
Part Number 08206-9002 Fluid Type Hydraulic Power Steering Fluid Volume 12 fl oz (355 mL) OEM Spec Honda Genuine - meets factory requirements Compatible Systems Hydraulic power steering only (not for electric/EPS systems) ATF Compatible No - do not substitute with ATF or generic hydraulic fluid Typical System Capacity ~32 fl oz (1 quart) - most vehicles need 2 bottles for a full flush -
- (1) 12 fl oz bottle of Honda Genuine Power Steering Fluid (08206-9002)
