RV6 Performance Front Pipe for 22+ Civic Type R/Integra Type S

RV6 Performance Front Pipe - Honda Civic Type R FL5 / Acura Integra Type S DE5

The factory front pipe on your FL5 Type R or Integra Type S is a choke point. Honda used a 2.37 inch outer diameter mid pipe on the latest Type R and Type S, which is way too restrictive for a turbocharged K series that makes 315+ horsepower. RV6 built this front pipe to fix that. It's a full 3 inch OD pipe that replaces the factory unit and bolts directly to your factory exhaust or any aftermarket cat-back. Your turbo can finally breathe the way it should.

Full 3 Inch Construction

The entire pipe is built from 3 inch OD 304 stainless steel tubing. Everything from the turbo flange to the exhaust connection is stainless, including the double-lined interlock flex pipe and all the flanges. RV6's master welders TIG weld the entire assembly in the USA and back purge every weld with argon so the inside looks as clean as the outside. This isn't a cheap slip-fit pipe with spot welds. It's hand welded end to end.

Direct Bolt-On to Factory or Aftermarket Exhaust

The routing and hanger locations match the factory setup, so this front pipe bolts directly to your OEM exhaust or any aftermarket cat-back system. You're not cutting, welding, or fabricating anything to make it work. Just unbolt the factory front pipe and bolt this in.

Three Finish Options

The front pipe's available in three finishes: raw stainless, silver coating, or bronze coating. Raw stainless will eventually patina and discolor from heat, which is normal. The silver and bronze coatings help the pipe maintain a cleaner appearance over time.

What You Get

• RV6 3 inch front pipe
• Full 304 stainless steel construction
• 3 inch OD tubing throughout
• Double-lined interlock flex pipe
• TIG welded and argon back purged
• Made in USA
• 3x M10-1.25 x 35mm socket cap screws
• 6x M10-1.25 flanged lock nuts
• 1x 3 inch downpipe to front pipe gasket
• 1x 3 inch front pipe to exhaust gasket
• 1x 8mm hex L-key

Available Finishes

• Raw stainless steel
• Silver coating
• Bronze coating

Fits Your Car

• 2023+ Honda Civic Type R FL5
• 2024+ Acura Integra Type S DE5

Note: This front pipe does not fit the FK8 Civic Type R. It's designed specifically for the FL5 and DE5 chassis. Raw stainless finish will discolor over time from heat, which is normal. Silver and bronze coatings help maintain appearance longer.