Skunk2 Pro Series Front Camber Arms for 92-95 Civic/94-01 Integra

Skunk2 Pro Series Front Camber Arms - 1992-1995 Honda Civic / 1994-2001 Acura Integra

Lowered your EG Civic or DC2 Integra and now you've got too much negative camber up front eating the inside edge of your tires? The Skunk2 Pro Series front camber arms give you the adjustment range to dial camber back in. The factory front suspension has no camber adjustment at all, so once you lower the car you're stuck with whatever negative camber the new suspension geometry gives you. These arms replace the factory lower control arms with adjustable A-arms that use Skunk2's forged Pro Series ball joints and polyurethane bushings instead of rubber.

Adjustable from the Bottom for Easy Changes

Skunk2's ball joints are adjustable from the bottom up, which means you can make camber adjustments without removing the wheel or tearing apart the suspension. This is especially useful on lowered cars where you're already fighting limited access to everything. You can dial in your camber settings quickly and move on.

Polyurethane Bushings, No Rubber

The arms use three-piece low-deflection polyurethane bushings instead of rubber. Rubber bushings deflect and compress under load, which changes your alignment settings mid-corner. Polyurethane bushings don't have the pre-load that rubber bushings do, so the arm can pivot freely without fighting the bushing. You get more consistent handling because your alignment settings stay where you set them instead of shifting around under load.

Forged Pro Series Ball Joints

The ball joints are one-piece forged units with low-profile top plates for extra clearance, higher clamping loads for secure mounting, and cadmium plating to resist corrosion. They're designed to handle the loads from lowered suspension without failing the way some other camber kits do.

What You Get

• Skunk2 Pro Series front camber arms (pair, left and right)
• Forged Pro Series ball joints
• Three-piece polyurethane bushings
• Low-profile ball joint top plates
• Cadmium-plated hardware
• Adjustable from the bottom for easy camber changes

Fits Your Car

• 1992-1995 Honda Civic (EG chassis)
• 1994-2001 Acura Integra (DC2 chassis)

Note: These arms do NOT fit the 1996-2000 Honda Civic (EK chassis). EG and EK suspensions are different. Get an alignment after installing camber arms to dial in your camber, toe, and caster settings properly.