Speed Vault Motorsports Cargo Cover Plastics for 92-95 Civic Hatch

Speed Vault Motorsports Cargo Cover Plastics - 1992-1995 Honda Civic Hatch

The cargo cover in your EG hatch is falling apart. The plastic mounting pieces are cracked, the pins are snapped off, or they're just gone. The cover's flopping around back there every time you go over a bump or you threw it in the garage six months ago because it wouldn't stay up anymore. Speed Vault Motorsports makes these replacement mounting plastics specifically for EG hatches. They work with your factory Honda cover and they work with Speed Vault's aftermarket cover. You get the locating pins, the locking pins, and all 12 screws. Install them and your cover's back to working like Honda designed it. These aren't some 3D printed parts off somebody's Ender 3. Speed Vault injection-molds these so they're actually strong and they fit right. If your factory cover's still decent but the hardware's trashed, you're restoring it with this kit instead of dropping $150 on a whole new cover.

Here's What Happens to 30-Year-Old Plastics

The factory mounting pieces in your EG have been sitting there since 1992-1995 getting cooked by the sun. The plastic gets brittle. The locating pins snap off when you try to lift the cover. The locking pins crack and won't hold the cover up anymore. The screw bosses break and now the screws just spin. The cover rattles. It falls down when you hit a pothole. It's annoying as hell so most people just rip it out and throw it in the corner of the garage. We've seen it a hundred times. Speed Vault's replacement pieces are fresh injection-molded plastic. They're not brittle. They're not going to snap the first time you install them. They fit the factory Honda cover perfectly and they fit Speed Vault's aftermarket cover. If you've got a good OEM cover and you just need new mounting hardware, this kit's way cheaper than buying a whole new cover. Thirty bucks for hardware beats $150 for a new cover.

Injection Molded Because 3D Printed Parts Suck

Speed Vault injection-molds these parts. That means they're made in a proper mold with consistent wall thickness and solid material all the way through. They're not 3D printed. 3D printed parts have visible layer lines and they're weak because the layers separate under stress. We've seen 3D printed cargo cover parts crack in two weeks. Injection-molded parts are way stronger and they look like OEM parts. The finish is smooth. The tolerances are tight. Speed Vault includes everything you need. Locating pins that position the cover. Locking pins that hold it up. All 12 mounting screws. You're not digging through your toolbox trying to find screws that fit or reusing 30-year-old corroded Honda screws that strip out when you tighten them.

Works with Factory Cover or Speed Vault Cover

These mounting pieces work with the factory Honda cargo cover and the Speed Vault cargo cover. If your OEM cover's still in good shape but the mounting hardware's broken, bolt these on and you're done. If you're buying Speed Vault's aftermarket cover and you want extra hardware or replacement parts for later, these are the exact same pieces that come with Speed Vault's cover. You can also use these if you scored a clean OEM cover at a junkyard but it didn't come with any of the mounting hardware. This kit gives you everything you need to mount it.

What You Get

• Speed Vault Motorsports cargo cover mounting plastic set for 1992-1995 EG Civic hatch
• Injection-molded plastic construction (NOT 3D printed garbage)
• Locating pins (position the cover correctly)
• Locking pins (hold the cover in the up position)
• 12 mounting screws (complete hardware kit, nothing extra to buy)
• Works with OEM Honda cargo cover
• Works with Speed Vault Motorsports aftermarket cargo cover
• Made by Speed Vault Motorsports

Fits This Car

• 1992-1995 Honda Civic Hatchback (EG6/EG9/EH2/EH3/EJ1)

Note: Works with both OEM Honda cargo cover and Speed Vault Motorsports aftermarket cargo cover. Complete kit includes locating pins, locking pins, and all 12 screws (nothing else to buy). Injection-molded plastic for OEM-quality strength and fit (NOT 3D printed - 3D printed parts are weak and crack easily). Use this kit to restore a factory Honda cover with broken or missing mounting hardware instead of buying a whole new cover ($30 for hardware vs. $150 for new cover). Factory Honda plastics are 30 years old and brittle from heat cycling - locating pins snap, locking pins crack, screw bosses break. Speed Vault's fresh molded plastic won't crack on installation. If you have a good OEM cover but broken mounting pieces, this kit restores it. If you found a used OEM cover at a junkyard without hardware, this kit completes it. Also works as replacement parts for Speed Vault aftermarket cargo covers. Made by Speed Vault Motorsports specifically for EG Civic hatches.