Action Clutch OE-HD Flywheel for 03-12 Accord/EP3/RSX Base

Action Clutch OE-HD Flywheel - K20A3/K24A4/K24A8/K24Z2/K24Z7

Replacing your clutch and your flywheel's beat up or resurfaced too many times? The Action Clutch OE-HD flywheel is a factory-weight replacement flywheel for K20A3 and K24 engines. It's the same weight and dimensions as your stock flywheel, so it drives exactly like factory. You're getting a fresh friction surface for your new clutch instead of trying to resurface your old flywheel that's already been machined three times. If you want stock drivability with a new flywheel surface, this is what you need. If you want a lightweight flywheel for sharper throttle response, this isn't it - get a lightweight chromoly flywheel instead.

Here's Why You'd Replace Your Flywheel

When you're replacing your clutch, you're supposed to resurface or replace your flywheel. The flywheel surface gets scored and glazed from the old clutch disc. If you install a new clutch on a scored or glazed flywheel, the clutch won't break in properly and it'll chatter or slip. Most people resurface their old flywheel to save money. But if your flywheel's been resurfaced multiple times, it's getting thin and the step height might be wrong. A bad resurface job can create taper or leave hot spots that cause chatter and premature clutch wear. At some point, it's cheaper to just buy a new flywheel instead of paying a machine shop to resurface an old one that's questionable.

Factory Weight - Drives Like Stock

This flywheel weighs the same as your factory flywheel. It's not a lightweight flywheel. That means your car launches the same as it did with your stock flywheel - smooth and easy. Lightweight flywheels make your engine rev faster, but they're harder to launch from a stop and they create more noise and vibration. If you're daily driving and you don't want the harshness of a lightweight flywheel, the OE-HD flywheel keeps your car feeling stock. If you want sharper throttle response and faster revs, you need a lightweight flywheel instead.

2012-2015 Civic Si Requires Specific Clutch Kit

If you're installing this flywheel on a 2012-2015 Civic Si (K24Z7), you need to use the Action Clutch FFW clutch kit (part number ACC-CLK-01-K1). The K24Z7 Civic Si came with a different flywheel from the factory than the other K series applications. This OE-HD flywheel is the correct flywheel for the K24Z7, but you need the FFW clutch kit to go with it. If you're using this flywheel on any other application (Accord, RSX Base, EP3 Civic Si), you can use any Action Clutch K series clutch kit.

What You Get

• Action Clutch OE-HD flywheel
• Part number: AC102-OEHD-5
• Factory OEM weight and dimensions
• Fresh friction surface for proper clutch break-in
• Direct bolt-in replacement (no balancing required)
• Works for street and light track use
• Flywheel bolts NOT included (reuse stock bolts or buy new)

Fits Your Car

• 2003-2007 Honda Accord (K24A4, K24A8)
• 2008-2012 Honda Accord (K24Z2)
• 2002-2005 Honda Civic Si EP3 (K20A3)
• 2002-2006 Acura RSX Base (K20A3)
• 2012-2015 Honda Civic Si (K24Z7 - requires Action Clutch FFW kit ACC-CLK-01-K1)

Compatible Engines

• K20A3 (2002-2005 Civic Si EP3, 2002-2006 RSX Base)
• K24A4 (2003-2007 Accord)
• K24A8 (2003-2007 Accord)
• K24Z2 (2008-2012 Accord)
• K24Z7 (2012-2015 Civic Si - requires FFW clutch kit)

Note: This is a factory-weight flywheel, not a lightweight flywheel. If you want sharper throttle response and faster revs, you need a lightweight chromoly flywheel instead. If you're installing this on a 2012-2015 Civic Si (K24Z7), you MUST use the Action Clutch FFW clutch kit (part number ACC-CLK-01-K1). Other clutch kits won't work with this flywheel on the K24Z7. Use new flywheel bolts or check your stock bolts for stretch. Some applications use torque-to-yield flywheel bolts that shouldn't be reused. Don't reuse an old clutch with a new flywheel. If you're replacing your flywheel, replace your clutch at the same time. The flywheel is machined to work with a new clutch disc, not a worn one.