Honda Rubber Air Intake Mounting Bushing 17212-P2J-000

Honda Rubber Air Intake Mounting Bushing - 17212-P2J-000

Bought a used Honda or Acura and your intake box rattles around or sits crooked? You're probably missing the rubber mounting bushing. Honda part number 17212-P2J-000 is the rubber bushing that mounts on the bottom of your intake box to isolate it from engine vibration. A lot of used cars are missing this bushing because the previous owner did some sketchy intake modification and lost it, or the car got in a front-end accident and the body shop replaced the intake box without the bushing. Without it, your intake box moves around and rattles. Fresh bushing mounts your intake box where it's supposed to sit.

Why This Bushing's Always Missing

If you bought a used car and the intake box's moving around or you hear rattling from the airbox area, check for this bushing. It's one of those parts that gets lost during modifications or repair work. Someone swaps in a short ram intake or cold air intake, then swaps back to stock and forgets to reinstall the bushing. Or the car gets hit and the body shop throws a junkyard intake box in without checking for all the mounting hardware. The bushing's small and it's easy to miss if you're not paying attention. If it's missing, your intake box just sits there wobbling around instead of being properly mounted.

Common on Modified or Accident Cars

This bushing goes missing most often on cars that've been modified or wrecked. If you're buying a used Civic, Accord, or CR-V and the previous owner had an aftermarket intake at some point, there's a good chance this bushing's gone. Same thing with cars that've been in front-end accidents. The intake box gets damaged in the crash, the shop replaces it, but they don't transfer over the little rubber bushing. You pick up the car and your intake box's loose. Now you know why.

What You Get

• Honda OEM air intake mounting bushing (part number 17212-P2J-000)
• Rubber construction (isolates intake box from vibration)
• Mounts on lower section of intake box
• Prevents intake box from rattling or moving
• Same bushing your car came with from the factory

Fits Your Car

• 2013-2022 Acura ILX
• 2023-2026 Acura Integra
• 2022-2026 Acura MDX
• 2014-2020 Acura RLX
• 2009-2014 Acura TL
• 2022-2025 Acura TLX
• 2010-2014 Acura TSX V6
• 2008-2012 Honda Accord V6
• 2018-2025 Honda Accord 1.5T/2.0T
• 1996-2000 Honda Civic DX/EX/LX
• 1999-2000 Honda Civic Si
• 2006-2011 Honda Civic DX/EX/LX
• 2012-2015 Honda Civic DX/EX/LX/Si
• 1997-2001 Honda CR-V
• 2007-2026 Honda CR-V
• 2010-2015 Honda Crosstour
• 2016-2022 Honda HR-V
• 2019-2022 Honda Insight
• 2011-2017 Honda Odyssey
• 2023-2025 Honda Pilot
• 2026 Honda Prelude
• 2009-2014 Honda Ridgeline