Innovative Mounts Motor Mount Kit 98-02 Accord

If you're running an F-series or H-series 1998-2002 Honda Accord and need motor mounts that can handle a tune without shaking your interior apart, the Innovative Mounts 75A kit hits the right balance between street drivability and real performance. The 75A polyurethane compound is stiffer than OEM rubber but not so aggressive that you're white-knuckling it on a daily commute - it's the compound most builders reach for when they want a noticeable handling improvement without going full race-hard.

These mounts are built specifically for the CG3/CG5 Accord chassis with an automatic transmission. The black steel frame houses no-tear polyurethane bushings that are CAD/CAM designed and stress-analyzed for fitment precision. Unlike the OEM mounts, which use oil-filled dampening containers, this kit eliminates that compliance entirely. What you get in exchange is a more direct engine-to-chassis connection - less wheel hop under load, sharper throttle response, and a platform that actually transfers power instead of absorbing it.

The honest tradeoff: depending on your engine series and how much power you're pushing, you will feel more vibration at idle and under load compared to stock. For a daily with a light tune, most drivers consider that acceptable. For a track build or an H-swap pushing toward the 250-400hp range, it's exactly what you want. If you're not sure whether 75A or a stiffer compound is right for your setup, reach out before ordering - returns are not accepted once the mounts have been installed.

Technical Specifications

What's Included

• Driver side motor mount (x1)
• Passenger side motor mount (x1)
• Rear torque mount (x1)

Fitment Notes

Fits 1998-2002 Honda Accord CG3/CG5 with automatic transmission. Compatible with F-Series and H-Series engine configurations including F20B, F23A, H22A, and H23A. Covers trim levels: DX, EX, LX, SE, and Value Package. Not designed for manual transmission applications - see Innovative Mounts' manual trans kit for CG Accord. Verify your engine series before ordering. These mounts replace OEM oil-filled units and are not a direct drop-in for liquid-filled mount housings without removing the OEM dampening assembly.

Frequently Asked Questions

Will this kit work with an H22A or H22A4 swap into the 98-02 Accord?

Yes - this kit is compatible with H-series engines including the H22A. Confirm your swap uses the CG chassis automatic transmission configuration and that your engine mounts align with the Innovative Mounts bracket positions before installing.

Why does the 75A compound matter? What's the difference vs. OEM or a stiffer 95A?

OEM mounts use oil-filled rubber that absorbs vibration well but introduces chassis flex under hard acceleration. The 75A polyurethane is firm enough to reduce that flex and wheel hop noticeably while still being tolerable on the street. A 95A compound is track-focused and will transmit significantly more NVH into the cabin - fine for a dedicated build, but most street/strip guys land on 75A as the right middle ground.

Is this kit compatible with manual transmission Accords?

No - INO-20251-75A is built for the automatic transmission CG Accord. Innovative Mounts offers a separate kit for manual trans applications. Double-check your transmission type before ordering.